Commercial Ice Machines   |  Contact

Commercial Ice Machines - AKD-125

Ice Cube and Water Dispenser

Commercial Ice Machine AKD-125
Commercial Ice Machine - AKD125 - shown with GT360 Series Ice Machine
KOLD-DRAFT Commercial Ice machines Features
KOLD-DRAFT Commercial Ice Machines produce full and half ice cubes, come with a 5-year warranty, and meet new energy standards!

On Demand

Fill 'em up. Where on-demand ice and water are needed, the KOLD-DRAFT AKD125 Automatic Ice Cube and Water Dispenser is the solution. Ideal for hospitals, training facilities, clinics, nursing homes, hotels, resorts, and schools, the AKD125 features one-hand, pushbutton dispensing for ease of operation when filling containers and ice buckets. For cool, clear ice water, an optional water valve and tapered ice spout facilitate glass filling.

The auger feed mechanism prevents the waste, spillage, and splashing problems caused by gravity dump machines. When demand for ice is low, an optional thermostatically controlled ice agitator keeps the ice in the bin in small dispensable pieces. Like all KOLD-DRAFT equipment, the AKD125 features corrosion-resistant stainless steel exterior and frame.

KOLD-DRAFT commercial ice machines feature a unique "upside-down" horizontal evaporator and water plate assembly. As water is sprayed upward into the evaporator cells, the pure water freezes first while particulates and air are forced out and dumped at the end of each cycle. This leaves only perfect crystal-clear cubes, nearly as pure as distilled water. Maintenance is easy, and the AKD125 is armed with our 5-year "bumper-to-bumper" warranty on all parts and labor — the longest in the industry. More on the

 

 

 

 

 

 

 

 

AKD125 Ice Cube and Water Dispenser

Exterior: All stainless steel standard.
Interior: Rotationally molded polyethylene.
Plumbing Connections: Two 3/4" I.D. flex tubing or drains. Bin drain is isolated for sanitation.
Electrical: 7/8" diameter opening for conduit fitting. Field connection access on
rear panel.
Motor: PSC type with automatic thermal
overload.
Storage Capacity: Approx. 125 lbs. (56.67 kg)
Insulation: Polyurethane foam.
Ice Agitation: We recommend agitation to keep the ice in small, dispensable pieces when the AKD is not in use for long periods of time. The optional field-installed agitation kit is 102116901.
Mechanism: Motor-driven auger.
Loading: Installation must include KOLD-DRAFT Classic GT Series Ice Cuber.
Spout: Universally sized for glass filling
and bucket filling.
Operation: Dispensing is continuous when
push-button is held.
Water/Glass Filler Option: Requires a separate portable
water line 1/2" F.P.T. connection.
The optional field-installed filler kit is 103100101.

 

General Specifications for AKD125 Ice Dispenser:

Model
Number
Rated Storage Capacity Voltage
Characteristics
Number of Wires Plus Ground
FLA HP
AKD125 125 lbs. (56.7 kg) 115-60-1 2 1.9 1/12
Note: Electrical specifications are sized for within 80 ft. or less. All AKD125s should be wired on a separate circuit.

 

Clearance Requirements:

Allow clearance at back for connections. See Ice Maker specifications for ventilation clearance requirements.

We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice.

Description Dimensions - inches (cm)
Ship Weight
# (kg)
W D H
AKD125 30.125 (76.5) 25.25 (64.1) 44.5 (113) 169 (77)
Commercial Ice machine AKD-125 Dimensions
Commercial Ice Machine - AKD-125 Ice Dispenser

 

 

More About our Commercial Ice Machines

ALL KOLD-DRAFT Commercial Ice Machines meet the California Energy Standards - read about the California Commercial Ice Machines Test - ( PDF - Test Laboratory Information For Commercial Refrigerators, Commercial Refrigerator-Freezers And Commercial Freezers)

 

 

© 2010 KOLD-DRAFT, All Rights Reserved US Made High Quality US-Made Commercial Ice Machines