Commercial Ice Machine GB1250 | B950
ICE CUBER
 |
| Ice Machine - GB1250 Series Ice Cuber on a B950 Bin |
 |
| Ice Machine - GB1250 on a B950 Bin. Stores 950 lbs. of ice, based on 35 lbs./cu.ft. at 90% of bin volume. |
Up To 1,229 lb. Daily Capacity
SIMPLICITY BY DESIGN
The KOLD-DRAFT 1250 Series Classic Ice Cuber produces
up to1,229 lbs. of ice per day. It is engineered with rugged
unibody construction and its time-proven design ensures
reliable operation, greater water efficiency and maximum
ice-making capacity. Serviceability is from the front and
the use of environmentally-friendly R-404A refrigerant
gives greater efficiency.
The KOLD-DRAFT B950 Bin holds 950 lbs. of ice. The B950
has a polyethylene liner and stainless steel exterior front,
sides and top. It is insulated with non-CFC foam for
exceptional rigidity and optimum insulation. The B950
comes with an insulated stainless steel lift up door.
THE HIGHEST QUALITY ICE
Ice that’s free from impurities. Ice that’s uniformly shaped ensuring maximum displacement and ease of handling.
Ice that sparkles, melts slowly and looks like ice should look. Three sizes of KOLD-DRAFT cubes to choose from that meet your exact needs. Full cubes, half cubes and cubelets – the highest quality ice.
STACKABILITY
GB Series Classic Ice Cubers are stackable with each other and can be stacked on existing KOLD-DRAFT GB Series Classic and Electronic Cubers. This unique “Add-A-Unit” feature will give you unsurpassed flexibility in ice-making capacity. So as your business grows, so can your ice capacity without using valuable floor space.
KOLD-DRAFT’s Commercial Ice Machine Warranty
KOLD-DRAFT’s warranty provides five years parts and labor on the entire machine and five years on the compressor and evaporator parts. More on the KOLD-DRAFT ice machine warranty.
General Specifications for GB1250 Commercial Ice Machine Series:
PLUMBING:1/2” FpT potable water inlet.
Condenser drain for GB1250 Series water cooled unit 1/2” FpT, supply 3/8” FpT.
Two 3/4” I.D. flexible tubes are provided for ice maker drains through the rear of the bin and cabinet.
EXTERIOR FINISH:
Type 300 Series stainless steel.
REFRIGERATION SYSTEM:
GB1250 Series uses a nominal 24,000 bTU compressor with dual R-404A thermostatic
expansion-valve controlled evaporators.
CLEARANCE REQUIREMENTS:
Allow 6” minimum clearance at back and top, 4” left side and 8” right side for ventilation and utility connections.
ICE MACHINE RECOMMENDED OPERATING REQUIREMENTS:
| Min. | Max. | |
| Air Temperatures | 45º | 90ºF |
| Water Temperatures | 45º | 90ºF |
| Water Pressures | 20-100 pSIG | |
| Voltage | 104-126V/198-253V | |
GB1250 Series Daily Capacities: Lbs. of ice per 24 hours per unit
| GB1250W Water Air-Cooled | GB1250A Air-Cooled | GB1250R Remote Air-Cooled 1,4 | ||||||
| Incoming Water Temp., ºF |
A mbient Temp., ºF | Incoming Water Temp., ºF | Ambient Temp., ºF | Incoming Water Temp., ºF | Ambient Temp., ºF | |||
| 70º | 90º | 70º | 90º | 70º | 90º | |||
| 50º | 1229lbs. | 562kg | – | 50º | 1083lbs. | 492kg | – | 50º | 1215lbs. | 552kg | – |
| 70º | – | 1160lbs. | 527kg | 70º | – | 1065lbs. | 483kg | 70º | – | 1160lbs. | 527kg |
| The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. KOLD-DRAFT ice machines are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. |
||||||||
GB1250 | B950 - ICE MACHINE - ICE CUBER
| MODEL | ICE PRODUCTION PER 24 HOURS 1 |
ELECTRICAL SUPPLY CHARACTERISTICS, V-HZ-PH |
NUMBER OF WIRES PLUS GROUND |
MINIMUM CIRCUIT AMPACITY 2 |
MAXIMUM FUSE SIZE, A |
CONDENS- ER UNIT TYPE |
SHIPPING WEIGHTS |
| GB1254A*5 | 1083 | 208/230-60-1 | 2 | 34 | 55 | air- cooled | 398lbs. | 181kg |
| GB1254W* | 1229 | 208/230-60-1 | 2 | 32 | 55 | water-cooled | 333lbs. | 151kg |
| GB1254R* | 1215 | 208/230-60-1 | 2 | 32 4 | 55 | remote air-cooled | 345lbs. | 156kg |
| GB1255A*5 | 1083 | 208/230-60-3 | 3 | 16.9 | 25 | air- cooled | 398lbs. | 181kg |
| GB1255W* | 1229 | 208/230-60-3 | 3 | 17.6 4 | 25 | water-cooled | 333lbs. | 151kg |
| GB1255R* | 1215 | 208/230-60-3 | 3 | - | 25 | remote air-cooled | 345lbs. | 156kg |
| GB1257A* | 1083 | 220-50-1 | 2 | - | - | air- cooled | 398lbs. | 181kg |
| GB1257R* | 1215 | 220-50-1 | 2 | - | - | remote air- | 345lbs. | 156kg |
| GB1257W* | 1229 | 380-50-3 | 3 | - | - | water-cooled | 333lbs. | 151 kg |
| *KOLD-DRAFT ICE: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 Condenser inlet temperature 70°F. 2 Production capacity at 50°F water and 70°F air. 3 Use this value to determine minimum wire size per National Electric Code Requirements. 4 Condenser fan supplied separately. 5 UL Pending. Please observe wire size listed above. Fuse or HACR-type circuit breaker of same rating shall be provided on installation or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. |
|||||||
GB1250 | B950 ICE MACHINE SCHEMATIC
 |
View GB1250 | B950 Ice Machine Specs (PDF)
More About Our Commercial Ice Machines and Commercial Ice Makers
- See why KOLD-DRAFT ice machines make the "Best Ice in the World"
- Read more about KOLD-DRAFT's Ice Machine Warranty, Five Years on Parts and Labor Ice Machine Warranty
- Check out our "Green" Ice - ALL KOLD-DRAFT Commercial Ice Machines are Green!
- Learn how KOLD-DRAFT Ice Machines Turned Ice-Making Upside Down!
- Not sure how much ice you need? Check out our Ice Machine Usage Guide
- See our full line of commercial ice machines
- Read more on our commercial ice makers for all markets
- Please contact us with any questions regarding ice machines for your particular market
High Quality US-Made 