Commercial Ice Machine GT550 | B400
ICE CUBER
 |
| Ice Machine - GT550 Series Ice Cuber on a B400 Bin |
 |
| Ice Machine - GT550 on a B400 Bin. Stores 400 lbs. of ice, based on 35 lbs./cu.ft. at 90% of bin volume. |
Up to 520 lb. Daily Capacity
SIMPLICITY BY DESIGN
The KOLD-DRAFT 550 Series Classic Ice Cuber produces up to 520 lbs. of ice per day. It is engineered with rugged stainless steel panels and frame. Its time-proven design
ensures reliable operation, greater water efficiency and maximum ice-making capacity. Serviceability is from the front and the use of environmentally-friendly R-404A refrigerant gives greater efficiency.
The KOLD-DRAFT B400 Bin holds 400 lbs. of ice. The B400 has a stainless steel interior liner and stainless steel exterior front, sides and back. It is insulated with 2" of expanded foam insulation and comes with an insulated stainless steel lift up door that will withstand years of hard use.
THE HIGHEST QUALITY ICE
Ice that’s free from impurities. Ice that’s uniformly shaped ensuring maximum displacement and ease of handling. Ice that sparkles, melts slowly and looks like ice should look. Three sizes of KOLD-DRAFT cubes to choose from that meet your exact needs. Full cubes, half cubes and cubelets - the highest quality ice.
KOLD-DRAFT’s Ice Commercial Machine Warranty
KOLD-DRAFT’s warranty provides five years parts and labor on the entire machine and five years on the compressor and evaporator parts. More on the KOLD-DRAFT ice machine warranty.
General Specifications for GT550 Commercial Ice Machine Series:
PLUMBING: 1/4” FPT potable water inlet.
Condenser water supply inlet: 3/8” FPT
1” FPT bin drain.
Condenser drain: 1/2” FPT
3/4” I.D. flex tubing cuber drain.
EXTERIOR FINISH:
Type 300 Series stainless steel.
REFRIGERATION SYSTEM:
3/4 HP Compressor. Thermostatic expansion-valve controlled. R-404A-HFC.
CLEARANCE REQUIREMENTS:
Allow 4” left side, 4” right side and 8” back and top for ventilation and utility connections.
RECOMMENDED OPERATING REQUIREMENTS:
| Min. | Max. | |
| Air Temperatures | 45º | 90ºF |
| Water Temperatures | 45º | 90ºF |
| Water Pressures | 20-100 PSIG | |
| Voltage | 104-126V/198-253V | |
GT550 Series Daily Capacities: Lbs. of ice per 24 hours per unit
| GT551W Water-Cooled | GT551A Air-Cooled | GT551R Remote Air-Cooled1,4 | ||||||
| Incoming Water Temp., ºF |
A mbient Temp., ºF | Incoming Water Temp., ºF | Ambient Temp., ºF | Incoming Water Temp., ºF | Ambient Temp., ºF | |||
| 70º | 90º | 70º | 90º | 70º | 90º | |||
| 50º | 515lbs. | 234kg | – | 50º | 520lbs. | 236kg | – | 50º | 539lbs. | 245kg | – |
| 70º | – | 460lbs. | 209kg | 70º | – | 423lbs. | 192kg | 70º | – | 453lbs. | 206kg |
| The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. KOLD-DRAFT ice machines are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. |
||||||||
GT550 | B400 - ICE MACHINE - ICE CUBER
| MODEL | ICE PRODUCTION PER 24 HOURS 2 |
ELECTRICAL SUPPLY CHARACTERISTICS, V-HZ-PH |
NUMBER OF WIRES PLUS GROUND |
MINIMUM CIRCUIT AMPACITY 3 |
MAXIMUM FUSE MODEL SIZE, A |
CONDENS- ER UNIT TYPE |
SHIPPING WEIGHTS |
| GT551A* | 520 | 115-60-1 | 2 | 23.4 | 35 | air- cooled | 194lbs. | 88kg |
| GT551W* | 515 | 115-60-1 | 2 | 17.9 | 30 | water-cooled | 190lbs. | 86kg |
| GT551R* | 539 | 115-60-1 | 2 | 20.0 | 30 | remote air-cooled | 198lbs. | 90kg |
| GT554A* | 520 | 208/230-60-1 | 2 | 14.9 | 25 | air- cooled | 194lbs. | 88kg |
| GT554W* | 515 | 208/230-60-1 | 2 | 14.3 | 20 | water-cooled | 190lbs. | 86kg |
| *KOLD-DRAFT ICE: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 Condenser inlet temperature 70°F. 2 Production capacity at 50°F water and 70°F air. National Electric Code Requirements. 3 Use this value to determine minimum wire size per 4 Condenser fan supplied separately. Please observe minimum circuit ampacity and maximum fuse size listed above. Fuse or HACR-type circuit breaker branch circuit protection within the range of minimum ampacity and maximum fuse size shall be provided or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. |
|||||||
ICE MACHINE CLEARANCE REQUIREMENTS
 |
View GT550-B400 Ice Machine Specs (PDF)
More About our Commercial Ice Machines
- Read more about KOLD-DRAFT's Ice Machine Warranty
- See why KOLD-DRAFT ice machines make the "Best Ice in the World"
- Learn how KOLD-DRAFT Ice Machines Turned Ice-Making Updside!
- ALL KOLD-DRAFT Commercial Ice Machines are Green! Check out our Ice Machine Usage Guide
- See our full line of commercial ice machines
- Read more on our commercial ice makers for all markets
- Please contact us with any questions regarding ice machines
High Quality US-Made 