Frequently Asked Questions

How long will a Kold-Draft machine last vs. the competition?

Kold-Draft ice cubers have a longer product life cycle, lasting two or three times longer than competitive machines properly maintained. Cubers lasting 15, 20, even 30 years are not uncommon. Competitive machines just do not last this long. Try to find a thirty year old competitor machine. This makes Kold-Draft the least expensive ice machine - "best value cuber"

Do I need an expensive water filtration system when I purchase a Kold-Draft?

No. Kold-Draft's ice making process eliminates the need for costly water filtration systems and replacement cartridges in most cases. Water with high levels of chlorine should be filtered.

Kold-Draft appears to be more expensive than the competitors, why?

Kold-Draft offers the "best value cuber" in the ice maker industry today. It is longer lasting, more durable, and the exclusive upside down evaporator design makes Kold-Draft the least expensive cuber on the market. In addition, no expensive filtration system accessory is required in most application this places a Kold-Draft in a very competitive pricing position at the time of purchase.

Does the Kold-Draft use complicated internal cleaning systems?

No. Kold-Draft does not need automatic cleaning systems. Why? Kold-Draft automatically flushes out and rinses the system with each harvest and starts the next cycle with a fresh batch of water. Kold-Draft is a true fresh water cuber.

Some competitive machines provide no or incomplete drainage after the freeze cycle which concentrates impurities and leads to mineral deposits on the evaporator and corrosion
Some competitive machines will not harvest due to mineral deposits on ice harvest mechanism and/or the evaporator
Siphon methods of drain-off lead to service problems and "pump out" systems require an added solenoid at additional cost

Do I need to adjust my Kold-Draft after installation?

No. The water level control determines the freeze/harvest cycles. Kold-Draft takes on a measured amount of water, when it reaches the low water point most of the water has been turned into ice and the machine harvests. No seasonal adjustments are necessary to pressure controls or timers. The harvest of ice is determined by the transition of water into ice. When the water is depleted the ice is harvested.

Will Kold-Draft efficiently use my water supply?

Yes. New potable water consumption is competitive with or better than other systems. Verified by UL, File "EV23611"

Does Kold-Draft use inferior material in it's evaporator?

No. All evaporators are tin plated copper for excellent heat transfer and corrosion resistance

Will my Kold-Draft ice "waffle" or stick together in the bin after production?

No. 100% gravity assist drop of ice - horizontal evaporator vs. slant fin

Leads to unassisted rapid harvest even if corrosion resistant coating has deteriorated.
Rapid harvests reduce the amount of ice meltage during harvest and allow for minimal webs between cubes which eliminates "waffle ice".
No inconsistent freezing in evaporator cells because water is forcibly injected into the cells.

Will my Kold-Draft produce consistent ice shapes every time?

Yes. Kold-Draft will not produce odd shaped cubes (irregular rhomboid, contour, crescent, etc.). Kold-Draft's ice is easier to handle, higher displacement, the beverage will not splash out of the glass, making a better looking drink - Good ice is a merchandising tool that helps to sell more drinks

Will Kold-Draft cuber stack? If yes, how many?

Yes. Kold-Draft stacks best:

Only 16" high - can stack 4 or 5 cubers to competitors 2 in the same head room
Rugged frame won't buckle. Skins are not part of the support structure

Will my new Kold-Draft cuber stack on my existing Kold-Draft cuber?

Yes. New Kold-Draft cubers are compatible (stackable) with new and old Kold-Draft cubers, crushers, dispensers and bins You can mix models in a stack: old style, new style, different series, and crusher.

Why does Kold-Draft use all stainless steel and not less expensive plastic molding and doors?

All Stainless steel simply provides durability of outer skin and door panels. The Kold-Draft machine stainless steel frame provides structural stability, all providing greater longevity

What are the available refrigeration systems?

Kold-Draft cubers are available with a variety of refrigeration systems: air cooled, water cooled, remote air cooled

Ice FAQs

What is the difference between Kold Draft's ice vs. all the competitors?

Kold-Draft makes The Best Ice In The World. The Horizontal evaporator and water plate assembly with high speed pressurized water flow injected into the evaporator actually freezes out impurities. Even water distribution in the evaporator produces perfect cubes identical to each other - Ice provided is purer than the supply water.

What kind of ice will Kold Draft produce?

Kold-Draft produces the only "gourmet ice" which is very cold. Harvested Kold-Draft ice is colder than the freezing temperature of water. Learn More

Why should I purchase an ice crusher vs. a Flaker?

Kold-Draft's crushed ice is slower melting than flake ice because it is colder and harder. Providing a better appearance than flake ice - It sparkles. Excellent for frappe type drinks because of purity - no taste imparted to the drink and much lower maintenance cost than flakers, resulting in a less expensive machine over time.